Purchase now and save 15%  !!

This product requires 10-15 working days processing time. Will take an additional 7-10 working days shipping time.

Shipping Charges: $35 per unit

Tools You Will Need:

A ladder

A pair of screwdrivers

A pair of wire cutters

Chandelier Replacement in 7 Steps

Step 1: Turn the power off

Locate the breaker box. Next, you will need to turn off the power at the breaker box. Be sure to double check that the power is off by turning on and off the light switch.

Step 2: Access Electrical Connections

Place your ladder off to one side of the chandelier. Unscrew the light canopy to access the electrical connections; there will either be one nut in the middle of the canopy or two screws on each side of the canopy. You may need an extra person to help assist in supporting the weight of the chandelier as only the electrical wires will be supporting your light fixture.

Step 3: Disconnect & Remove the Old Light Fixture 

Remove the wire nut electrical connectors from the wiring by twisting them counter clockwise. The ground wire may be screwed to the electrical box with a green screw; you will need to remove this. If another person is not assisting you, it will be safer to cut the wires on the lighting side of the wire nuts, lower the light and then remove the connectors.

Step 4: Preparation for New Chandelier

Next, you need to prepare to hang the new chandelier. You may begin preparation by reading all of the manufacturer's instructions. The instructions will indicate how to put the chandelier lighting together, if it needs assembled.

Step 5: Installing the New Chandelier

Now, you will need to raise the new chandelier and connect the wires. Again, you may need the assistance of an extra person. Make sure to use new wire nuts. You will need to make sure that there are no bare wires showing and that the wire nuts are securely fastened. Remember to re-attach the ground wire screw and ground wire.

Step 6: Final Checks

You will need to tuck the wires into the electrical box and fasten the canopy according to the manufacturer's detailed instructions. You will need to make sure everything is secure.

Step 7: Turn the Power On

Turn the power back on at the breaker box and make sure everything is working properly. Now you're ready to clean up and discard your old chandelier.

Wholesale:

Please click here for wholesale inquires.

**Please note that all prices shown are in USD

        Tell Us What You Think!

Write a review on this product and share with others your opinion.

Make sure to indicate item # found under the product image. All reviews will be moderated and will be posted within 2 business days. Inappropriate reviews will not be posted.